15
2.11 - Clearing Machine:
From the System Setup screen the machine has the facility to be emptied or cleared.
The
switch is used for this at the end of a job run. It can only be selected if all feed
stations have been deselected using the cancel switch
and the on line sensor is empty.
In this condition,
will change the screen to the Machine Clearing screen, as shown below:
CYCLE START. This can be used to start the machine if it is not running.
Flashes if a machine cover is open.
Go to the System Setup screen. (See 2.4).
If an error occurs during clearing the Operators’ screen will be displayed showing a
particular fault and the machine will stop as in normal run.