26
4.2.3 Envelope Backstop
The envelope backstop is adjusted to the size of envelope. Envelope size is measured from
the bottom edge to the crease line, and should be set on the scale inside the back cover. Undo
the thumbscrew on the left and slide the stop to the correct position, tighten the thumbscrew
4.2.4 Wetting Brush
Adjustments can be made to the position of the brush by rotating the thumbscrew inside the
rear cover on the right hand side.
To adjust the water level in the brush reservoir, the water bottle tank can be moved up or
down using the two 4mm cap head bolts. For a wetter brush move the tank up, for dryer
move it down
Envelope
Backstop
Thumbscrew
Brush
Position
Thumbscrew
Water Bottle
Tank
4mm Bolts