Kartsana Fuego TG-243, Instruction Manual

Page: 13 / 29

OPERATION AND HANDLING OF THE
FUEGO STRETCHER
11
 Anchoring with a plate
Loosen the screws as shown in the following figure. To assemble them just follow
the same process but in reverse order.
To assemble them just follow the process in reverse order, fastening the ‘A’ screws
to the ‘B’ nuts inside the guides of the aluminium plates. The lateral belts indicated
in paragraph 2.2.8.1.1 are located on the section marked 86 on the exploded view
of the stretcher shown on page 21 in the way indicated in the left-hand figure at the
bottom. The head belts indicated in paragraph 2.2.8.1.2 are located in panel
marked with the number 9 in the exploded view of the stretcher included in this
manual.