Kartsana Fuego TG-243, Instruction Manual

Page: 12 / 29

OPERATION AND HANDLING OF THE
FUEGO STRETCHER
10
2.2.7. Method for fastening the safety belt on the patient’s stomach
It is advisable for this belt to be attached to the stretcher to ensure the
complete safety of the patients and guarantee compliance with the UNE-EN 1865
standard test that is performed.
Put the female part of the buckle A and male part B in the position shown in the figure
below and insert the latter into the slot in the former. Once the assembly is firmly
secured, centre and tauten it, adjusting the tension of the belt at end C.
It is advisable to ensure that while the patient is on the stretcher, he/she
is secured at all times by the safety belts.
2.2.8. Dismantling-assembling of the stretcher belts
There are two different types of anchoring for the stretcher belts:
 Anchoring with a ring
To dismantle the belts, pass the belt through the slot in the buckle as shown in the
following figure. To assembly it, just follow the same process but in reverse order.
Buckle slot
Belt buckle