KP1R
2. KP1R Receiver
2.1 Controls and Features
1. Antenna
2. Indicators of Antenna and Squelch: Indicates the signal of each channel.
3. Power On/Off and Volume control: Turn on the receiver and adjust the volume
of headphone.
4. Audio Control: To replace the audio left and right.
5. LCD: Display the working informations of receiver.
6.
Set
Button: To set and operate the receiver.
7. Headphone Jack: Connect the headphone.
8. Belt Clip.
9. Direction Guide of battery installation: To install the battery follow the direction
instruction.
10. Battery Compartment Door.
6
7
A. Stereo / Mix Output
B. Volume Limiting Function
C. Signal Intensity
D. Level of Channel2/Audio Right
E. Level of Channel1/Audio Left
F. Frequency/Channel
G. Battery Indicator
H. Audio Balanced Setting
I. Squelch Setting
2.2 Receiver Control
1. Audio Left/Right Control.
In according to the indicator of receiver, rotate the
audio control knob to adjust the audio left/right
or channel 1/ 2.
When indicating dot on the knob is turned to the
mid-point, the audio left and right outputs are in
geometric proportion.
2. ON/OFF/VOLUME Control.
Rotate the ON/OFF/VOLUME knob to adjust the
volume.
3. Frequency/Channel Setting.
Length press the setting button
or
at
one blow, the frequency/channel will flash to enter
the state of frequency/channel setting.
1) Short press
set
button to replace between
frequency and channel.
2) Short press the setting button
or
,
the frequency/channel will turn up/down a level.
3) Length press the setting button
or
,
the frequency/channel will turn up/down continuously.
2.3 Receiver Setting
Short press
set
button to replace the states
between MIX
LIM
SQL
EQ
.
1) Mix/Stereo Output Setting: Short press
set
button until
MIX
is flashing, then short press
button to turn on/off the
MIX
function. Turn on this function which will display as
, it is the state of mix outputs to audio left
and right(L+R). If adjust the audio left and right
control knob in simultaneity, also can adjust the mix
ratio of audio left and right. To turn off this function
which will display as
, meanwhile, it is the
state of stereo output.