
Rear panel
Front panel
3
1. KP1TA Transmitter
1.1 Controls and Features
1. Power Switch: Turns transmitter power ON/OFF.
2. Headphone Output Jack: Connects the headphone.
3. Headphone Volume Control: Adjust the volume of headphone.
4. Indicator of Volume Limiter: To indicate whether the limiter function works.
5. LCD: Display the working informations of transmitter.
a. Level indicator of audio left/channel 1
b. Level indicator of audio right/channel 2
c. Indicator of transmission power
d. Indicator of volume limiter function
e. Channel indicator
f. Frequency indicator
6.
Set
Button: To set and operate the transmitter.
7. Antenna.
8. Audio Output: Transport the audio signal to other equipment.
9. Audio Input: Input the audio signal from here.
10. Audio Gain Adjustment of Input.
11. Switching control for mono,stereo,mix mode.
12. DC Power Jack.
2
10
4. Mix Mode Application
1. Receiver receives
two signals from
the transmitter
Counterclockwise
Mid-Point
Clockwise
Channel 1
Channel 2
2. Using the balance knob,
the user blends the two
signals until the correct
mix is achieved.
3. The receiver sends the
mixed signal to both
headphones.
4. The user may continue
to adjust the blend using
the balance knob
throughout the performance.
1.Receiver.....................................................................
2.Transmitter ................................................................
3.Headphone ................................................................
4.Audio cable ................................................................
5.AC power adapter for receiver....................................
6.19-inch equipment rack installation kit........................
7.Battery 1.5V................................................................
8.User guide..................................................................
1
1
1
2
1
2
2
1
SYSTEM COMPONENTS
KP1R