1.2 Transmitter Setting
1) Frequency Setting: Short press set button to
e nter s etting s tate; T hen s hort
press MENU setting b utton u ntil th e d isplay o f fr equency/channel is fl ashing.
Short press
o r
settin g butto n a t on e blow , th e frequency/channel
will turn up/down a level.
Length press
or
setting button, the frequency/channel will turn up
/down continuously.
2) Volume Limiter Setting: Short press set
button to enter setting state; Then
short press MENU setting bu tton un til the ind icator of v olu
me limit er is fla sh ing,
short press
or
setting bu tton to ac hieve th e se tting of vo lume lim
iter
function.
Indicates that turn on the l imiter f unction, t o l imit t he v olume i n a r ange.
Indicates that turn off the limiter function.
Attention
When progress setting, if none of action will be done for 3 seconds, the
system will exit setting state automatically, and save the current setting.
1.3 System Configuration and Application
KP1R
receiver
KP1TA
transmitter
Here is one of the ways to configurate, connect the CD mixer or any audio
equipment as the input parts . And connect to the amplifier, loudspeaker,
recorder or any equipments as the output parts.
3) Transmission Power Setting: Short press
set
button to enter setting state;
then short p
ress MENU setting but tonunt il the indi catorof tr an smission pow er
is flashing, short press
or
setting button to achieve the setting o
f
transmission power.
4
KP
1R
Signal from
Audio Source
KP1TA Transmitter
KP1R Receiver
Stereo Mode
Mix Mode
Signal from
Audio Source
Mono Mode 1
Mono Mode 2
Signal from
Audio Source
Signal from
Audio Source
1/L or 2/R
1/L or 2/R
1/L or 2/R
1/L or 2/R
1/L or 2/R
KP1TA Transmitter
KP1R Receiver
KP1TA Transmitter
KP1R Receiver
KP
1R
KP
1R
K
P
1R
KP1TA Transmitter
KP1R Receiver
K
P
1
R
3. Mix Mode/Stereo Control
The receiver receives two signals (1/L and 2/R) from transmitter, then processes
these signals in either mix mode or stereo:
Stereo: In stereo, the signals remian separate so tha
t 1/L i
s he ar
d throug h th
e
left headphone and 2/R is heard through the right headphone. The balance knob
on receiver to adjusts the balance between the left and right headphones.
Mix Mode: In mix m
ode, t
he s ignals a re mixed
in re
lation to o ne a nother u sing
the balanced into one signal
. The
on e mixe d signa
l is se nt to bo th t he l eft a nd
right headphone.
Stereo Control
Mix Mode Control
Mono Control
Used for conventional stereo monitor mixes
Used for mixing and combining an individual mix between
two distinct monitor sends
Used when only one(mono) monitor mix is available
9