Karsect KP1R User Manual Download Page 3

2

Performance Guide

Aim at the characteristic of ear, to care and prevent your ear and equipment, the
normal sound pressure level of headphone is 90dB in a colsing circumstance. 
Hereinafter, the divisiory datum for user reference ---on maximum time exposure
to sound pressure levels before hearing damage occurs.

          90 dB SPL at 8 Hours 
          95 dB SPL at 4 Hours
          100 dB SPL at 2 Hours
          105 dB SPL at 1 Hours
          110 dB SPL at 30 Minutes
          115 dB SPL at 15 Minutes
          120 dB SPL -----Damage may occur

Quick Set-Up and Use Guide

 

KP1TA

 transmitter

  

KP1R 

receiver

Turn ON the system and set to 
same frequency and channel

  

KP1R 

receiver

  

KP1TA 

transmitter

Press the battery compartment door 
follow the direction instruction to open

Install the batteries follow the battery direction 
instruction which shown on the case of receiver

K

P

1

R

K

P

1

R

KP1R

11

3.position the rack-mount brackets over the holes into the sides of each receiver.

4.Secure the brackets to the receivers with the supplied screws

RACK MOUNTING DUAL RECEIVER

1.Align the receivers side by side so that front panels both face the direction

2.Place the supplied straddle bars in the recesses on the top and bottom of
   the receivers.

So the barsoverlap both receivesrs.

CAUTION:DO not over-tighten the screws.

5.Slide the linked receivers into a 19-inch audio equipment rack.

6.Secure the brackets to the rack using the supplied screws.

Summary of Contents for KP1R








Reviews: