EN
15
BOISERIE WALL-PANEL INSTALLATION
STEP 1
Place the bracket “A” on the wall (with the help of a bubble
level) and mark with a pencil the position of the holes to
be drilled (see image 1).
Remove the bracket and drill the holes on the wall.
Place again the bracket on the wall and apply the dowels
and the screws in all the holes.
STEP 2
Hoof the Boiser panel through the hanger to the bracket
“A” already mounted on the wall (see image 2,3).
Image 2
MOBILE WALL MOUNTING
Use a bubble level
ATTENTION
The dowels and the screws supplied by Ka-
rol can be used or not at the installer’s de-
scretion (this depends on the type of wall
where the cabinet should be mounted)
Image 3
REAR VIEW BOISERIE.
Groove on the back of
the cabinet to be fixed
to the bracket “A”
Image 1
BRACKET “A” TO BE
WALL MOUNTED WITH DOWELS
Upper thread Boiserie
190 mm
Summary of Contents for KUT
Page 1: ...KUT Installation Manual...
