EN
13
MIRROR CABINET “MOVE” INSTALLATION
STEP 1
Place the bracket “A” on the wall (with the help of a spirit
level or similar) and mark with a pencil the position of the
holes to be drilled (see image 1).
Remove the bracket and drill the holes on the wall.
Place again the bracket on the wall and apply the dowels
and the screws in all the holes.
STEP 2
Hook the mirror cabinet though the hangers “B” (already
mounted) to the bracket “A” which has been previously
mounted on the wall, tighten the anti drop screws under
the bracket “A” and level the mirror cabinet horizontally
using the adjustment mechanisms on the hangers “B”
(see image 2)
Image 1
BRACKET “A” TO BE
MOUNTED ON THE WALL
WITH THE DOWELS
Image 2
HANGERS “B” TO BE
HOOKED TO THE BRA-
CKETS “A”
Use a bubble level
ATTENTION
The dowels and the screws supplied by Karol can
be used or not at the installer’s descretion (this
depends on the type of wall where the cabinet
should be mounted).
Summary of Contents for KUT
Page 1: ...KUT Installation Manual...
