EN
12
TALL UNITS INSTALLATION
STEP 1
Place the bracket “A” on the wall (with the help of a spirit
level or similar) and mark with a pencil the position of the
holes to be drilled (see image 1,2).
Remove the bracket and drill the holes on the wall.
Place again the bracket on the wall and apply the dowels
and the screws in all the holes (see image 1).
STEP 2
Hook the tall unit with the hangers “B” to the bracket “A”
which has just been mounted on the wall. Adjust the tall
unit horizontally using the screws on the hangers “B”
(see image 2)
STEP 3
One the tall unit has been installed and adjusted in the
definitive position, fix it with the dowel through the hole
“C” (see image 2).
Tighten the anti-drop screws under the bracket “A”.
Image 1
BRACKET “A” TO BE MOUNTED ON THE WALL WITH DOWELS
Image 2
HANGERS “B”
TO BE HOOKED
TO THE
BRACKETS “A”
ON THE WALL
Summary of Contents for KUT
Page 1: ...KUT Installation Manual...
