
43
SUGGESTION
●
Do not directly spray water on your scooter to wash it as this could lead to a
malfunction in the electric system.
●
Do not use gasoline, solvents or other abrasive solutions; the casing may become
deformed or damaged.
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
hardware is tightened securely, otherwise injury or damage may occur.
Suggested Maintenance Procedures
●
Before using the power scooter, make sure all nuts and bolts are tight. Check all
parts for damage or wear and have a qualified technician replace it if necessary.
Check all parts for proper adjustment.
●
Ensure that the batteries are properly maintained and charged as required.
●
Inspect the brake for proper operation.
●
The wheels and tires should be checked periodically for cracks and wear, and
should be replaced by a qualified technician.
●
Regularly check for loose nuts and/or bolts in the front and rear wheels. If loose,
have them adjusted by a qualified technician.
●
Clean dirt, dust and grease from exposed components.
●
A qualified technician can be found with an authorized distributor/dealer.
8.5 Transporting and Storing
Make sure the vehicle is stored with the seat set to the forward position, with the
ignition turned OFF and the key removed.
Summary of Contents for KS-242
