
24
CAUTION
Before charging, make sure to set the 115V 230V switch to match the local AC
voltage. If the switch is improperly set to a lower or higher voltage position, it will
cause damage to the charger, and battery, Change the 115V 230V switch
settings only when charger is disconnected from AC line voltage.
SUGGESTION
●
Do not disconnect the charger cord if the charging is not completed. The battery
life will be seriously shortened or decayed if the batteries are repeatedly used
without being fully charged. Therefore, be sure to always charge the batteries
fully.
●
Always complete the charging by letting the charge LED light turn green. NEVER
stop charging before it is completed.
●
When finished charging, disconnect the charger plug from the charging socket as
soon as possible. Even when the charger is turned OFF, the electric power will
slowly discharge if the cord is not disconnected. DO NOT leave the charger ON
connected to the scooter for more than 24 hours.
●
Charging time depends on the surrounding temperature; it takes longer in the
winter.
Summary of Contents for KS-242
