
31
CAUTION
When tightening the clamps, always use a box or crescent wrench. Pliers will round
off (strip) the nuts. NEVER wiggle the terminal when tightening as the battery may
be damaged.
●
Remove the batteries and cable assemblies from the scooter.
●
If necessary, lift the battery terminal insulator/ boot off the battery terminal (you will
need a crescent wrench).
●
Position and secure battery cables onto new battery terminals. Connect the black
cable to the negative (-) terminal. Connect the red cable to the positive (+)
terminal.
CAUTION
The positive (+) connector MUST be connected to the positive (+) terminal/post.
Otherwise, serious damage will occur to the electrical system.
Connect the battery wiring connector to the central relay box wiring connector.
WARNING
Always connect the black cable to the negative (-) terminal first. Otherwise, injury
may result.
Dispose of unwanted batteries according to federal, state, and local regulations. Do
not burn the batteries. Batteries should be recycled. Contact authorized dealers for
more information.
DO NOT improperly dispose of unwanted batteries or injuries may occur. Contact
with battery acid causes injuries or damage to skin. Mishandling can result in 2nd or
3rd degree burns or blindness. Swallowing battery acid will cause fatal burns to
internal organs. Breathing fumes from a battery may cause discomfort and damage
your respiratory system. Remove clothes immediately if they have been
contaminated with acid.
Summary of Contents for KS-242
