Karma 622, User Manual, Page: 4 / 10

2 15
START UP
1. Press the POWER SWITCH to the ON position after connecting
the electrical source and plumbing source. The tank will auto-
matically fill and the heater will come on when the water level
covers the heater and reaches the lower sensor probe.
NOTE: YOUR MODEL 622 IS SHIPPED WITH PUMP ROTORS IN
THE UNLOCKED POSITION. PRIOR TO PRIMING, LOCK BOTH
PUMP ROTORS (See Figure 2).
2. Open the door and load both product packs into the dispenser.
Assemble the fitment to each product pack.
3. To prime, press the water switch to the OFF position and put
the product switch to the ON position. To prime each side,
press dispense for each side until the product is visually
through all the tubing to the dispense spout. Turn the water
on. (Fig. 3)
Fig. 2
Fig. 3
- NOTES -