Karma 622 User Manual Download Page 1

M

ODEL

622

L

IQUID

C

OFFEE

D

ISPENSER

For use with shelf stable liquid coffee

GENERAL DESCRIPTION

This model 622 - two flavor dispenser is designed for use with liquid concen-
trate of various ratios (80:1-5:1). The model 622 uses peristaltic pumps to
deliver the coffee concentrate and vend valves that deliver the water. The dis-
pense ratio is 1 to 1.5 ounces per second. The dispensers efficient hot water
tank produces portion sizes up to 60 ounces from cold water lines. If high vol-
umes are needed, a hot water line connection can be made, or the dispenser
can be connected to 240v.

MODEL 622

SPECIFICATIONS

DIMENSIONS:

Overall 9

⁄

” W x 26”D x 28 

⁄

”H

CONSTRUCTION:

All Stainless Steel Cabinetry

ELECTRICAL:

115 V 50/60 HZ 12 amps or 208/240 V 50/60 HZ 
12 amps @ 240V

PLUMBING:

1/4” Waterline Filters

WATER RESERVOIR:

1 3/4 Gallons

DISPENSE SPOUTS:

2 independent mechanism for product

1 spout for hot water (center)

OPERATION:

Timed for each flavor

DISPENSE RATE:

1.5 ounces per second

PRODUCT COMPARTMENT SIZE:

8”H x 8”W x 9”D

SHIPPING WEIGHT:

68 lbs.

P.O. Box 433
Watertown, WI 53094 USA
920-261-1424
800-558-9565
Fax 920-261-3302
800-257-6806
Internet Web Page
http://www.karma-inc.com
E-mail - [email protected]

Producers of dependable dispensing equipment

for the food and beverage industries.

KARMA dispensers are covered by one or more U.S. patents and applications and corresponding foreign patents and applications.

Summary of Contents for 622











Reviews: