Karl Storz UNIDRIVE S III, Service Manual

Page: 163 / 170

05.13 / V1.0
4-5
UNIDRIVE
®
S III
D
Connect the footswitch.
✓
The error message
E12
(no motor) is displayed.
D
Connect a handpiece to the motor socket M1.
✓
The handpiece is recognized and the corresponding information displayed. e.g. P0, P1, etc.
D
Press the right footswitch pedal.
✓
The motor starts.
D
Release the footswitch pedal.
✓
The motor stops immediately.
D
Change the direction of rotation by pressing the mid button of the footswitch.
✓
The displayed direction of rotation changes.
For devices with motor socket M2:
D
Connect a handpiece to the motor socket M2.
D
Select the handpiece M2 by pressing the M button.
✓
The handpiece is recognized and the corresponding information displayed.
D
Press the right footswitch pedal.
✓
The motor starts.
D
Release the footswitch pedal.
✓
The motor stops immediately.
D
Change the direction of rotation by pressing the mid button of the footswitch.
✓
The displayed direction of rotation changes.
For devices providing a pump:
D
Press the left footswitch pedal.
✓
The pump starts running.
D
Change the flow of the pump pushing the +/- buttons on the display.
✓
The pump has to run regularly at all settings.
D
Open the tensioning lever of the pump.
✓
The error message E16 (irrigation pump not closed ) is displayed.
D
Close the tensioning lever of the pump again.
✓
The error message disappears.