Kargo Master 90001, Installation Manual

Page: 13 / 17

Instructions – 90001
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST) Page 12
Step 3 – Install Front Leg Assemblies

Measure center to center distance between
U-brackets on front and rear feet.

Slide front leg LH DS over the LH DS front
side-channel bottom-tube. Be sure the legs are
angled in the same direction.

Position front let assembly at the distance
measured.

LOOSELY TIGHTEN 3/8” set screws into threaded holes
in side channel.

Repeat for opposite RH PS front leg and side channel.

Using 5/16” x 3/4” hex head bolts, 5/16” washers, and
5/16” lock nuts, LOOSELY bolt front leg clamp bracket to
front leg assembly. DO NOT TIGHTEN.

Repeat for opposite side.
Step 4 – Install Rear Legs

Apply sealant entirely around each swaged joint.

Slide leg into rear side channel until holes in leg and
side channel align.

Using 3/8” x 2-1/2” hex head bolt, 3/8” flat washers,
and 3/8” lock nut, LOOSELY bolt leg to side channel.

Remove excess sealant.

Repeat for opposite side.
5/16” x 3/4”
Hex Head Bolts
3/8” x 2-1/2”
Hex Head Bolts