Instructions – 90001
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Page 10
Rear Foot Stake Pocket - Ford and Chevy:
Remove taillight. A T15 Torx wrench is supplied to
remove Chevy taillights.
On the rear foot only, insert the 3/8” x 8” button
head screw through the hole in the rear slotted
channel and the hole in the bottom of the rear
stake pocket.
Install the 3/8” fender washer and 3/8” lock nut
onto the 3/8” x 8” button head screw.
Loosely tighten.
Rear Foot All Vehicles:
Insert a 1/2” x 2-1/2” button
head screw with 1/2” lock
washer, through saddle
bushings inside of foot, into a
rail clamp, as shown.
Pressing foot tight against
inside of bed rail, position rail
clamp beneath bedrail, clear
of any obstacles.
Snug tighten bolt, clamping
foot to bed rail hold the front
footplate in position.
Repeat for other side.
STAKE POCKET CUT AWAY VIEW
REAR PASSENGER-SIDE FOOT
FRONT PASSENGER-SIDE FOOT
1/2” X 2-1/2” Button
Head Screws
