6
for time synchronization.
Time Server
User can insert an available IP address
of NTP server in Internet for time synchronization.
System Setup > Network Setup
IP Setup
IP Assignment
System allows you to assign the
device IP address dynamically from existing DHCP
server or set a static IP address manually.
IP Address
Once Static IP was selected, the IP
Address field will allow you to set the bridge device
IP address manually. This IP address of the bridge is
used as the base for all of your local network
settings.
Subnet Mask
This is the subnet mask address for
your bridge device. Set the IP subnet mask manually.
Default Gateway
Set the default gateway IP address
manually.
DNS 1 & 2
The Domain Name System (DNS) is how
the Internet translates domain or website names
into Internet addresses or URLs. Your ISP will provide
you with at least one DNS Server IP Address. If you
wish to use another, enter that IP Address in DNS 2
field.
Spanning Tree Protocol
STP
The Spanning Tree Protocol (STP) is a network
protocol that ensures a loop-free topology for any
bridged Ethernet local area network. The basic
function of STP is to prevent bridge loops and
ensuing broadcast radiation. Spanning tree also
allows a network design to include spare (redundant)
links to provide automatic backup paths if an active
link fails, without the danger of bridge loops, or the
need for manual enabling/disabling of these backup
links.
Ethernet Link Speed
Link
The link speed of Ethernet port can be changed
manually into 10/100 Half/Full duplex.
DHCP Server Setting
The ST5801GB SERIES OUTDOOR AP/BRIDGE series
can be configured as a DHCP server for a LAN
network. Once the DHCP Server is chose as on, the
DHCP server setting elements will spread out on the
page.
DHCP Server
Allows you to enable or disable the
DHCP server function in system.
IP Start / End
The IP Start and End Address specify
the range of addresses assigned by your device when
it functions as a DHCP server.
Primary & Secondary DNS
Set the primary and
