Installation Manual Kardia Alta
/
24
Ventilation
1.
Adjust all diffusers according to the adjustment table. This
table must be prepared by a qualified engineer in accordance
with NS-EN 15251: 2007 + NA: +2014, TEK17, or the applicable
local standard.
2.
Check that both filters are properly installed and remove
debris and construction dust from the unit.
3.
Turn on the unit and set the mode to "Home".
4.
Adjust fan speed in factory settings to what is specified on the
adjustment chart.
Auxiliary controls and sensors
1.
Connect pressure sensor, boost switch, and other controls as
per project specification. See the ventilation section under
“Technical information” for more detail.
