-
3
*If the water input pressure is below 60 PSI, a booster
pump is needed to keep the water input pressure at
above 0.4 MPa.
Consumables
Filter Type
Description
Order No.
Multi-Protect-Filter
First stage of filtration for pre-separation of particles and harmful substances
9.757-000.0
RO-Protect-Filter
Second stage of filtration for fine separation of harmful substances
9.757-001.0
RO-Protect-Filter
Second stage of filtration for fine separation of harmful substances
9.757-002.0
Post-Protect-Filter
Third stage of filtration for improvement of filtered water
9.757-008.0
Recommended filter replacement intervals
Multi-Protect-Filter
3 - 6
months
Note
Actual replacement cycles depend on multiple factors, like municipal
water quality, operating time and operating frequency etc., or as
needed (see section „Troubleshooting“).
Post-Protect-Filter
6 - 12
RO-Protect-Filter
24
Troubleshooting
몇
WARNING
Health hazards on account of improperly repaired appliance. The appliance may only be repaired by trained and skilled personnel.
Before doing any work on the machine:
Shut off water supply.
Turn on tap to depressurise unit.
Failure
Possible cause
Correction
No water dispensed
Water supply not connected
Connect to water supply.
Little water dispensed
Multi-Protect-Filter is blocked.
Replace the filter
Water leaking from filter chamber
Filter chamber gasket not in place or defective
Replace the filter
Filtered water has noticeable taste
Post-Protect-Filter needs replacing.
Replace the filter
Technical specifications
WPC 80 RO
Water input pressure
MPa (bar)
0,1...0,4
Water supply temperature
°C
5...38
Filter capacity
l/h
80 *
Ambient temperature
°C
4...40
Width
mm
415
Depth
mm
197
Height
mm
467
Weight (empty)
kg
6.2
Operating weight (with accessories and filled with water)
kg
10.2
Materials / approvals
All parts/components containing water are suited and approved for the use in direct contact with drinking water
in accordance with generally accepted industry standards.
9
EN