background image

     - 

2

1

T-piece to filtered water tap

2

Drinking water inlet

3

Fresh water outlet (filtered water)

4

Drain water line (concentrate)

ATTENTION

Risk of water damage. During installation, make sure all 
connections are secure and check for leaks. In case of 
doubt, consult an expert.

1

O-ring, outlet seal

2

Outlet to the filtered water tap

3

Stop cock connection

4

Untreated water line connection

Note

Inlet and outlet thread: 1/2"

Screw the stop cock into the connection piece, use 
sealing tape.

Insert the T-piece into the untreated water line.

Use an O-ring on the outlet and sealing tape on the 
inlet.

Insert hose (blue) from the filtered water tap into 
the T-piece and secure with screw connections.

Note

The filtered water tap should be installed over a basin 
connected to the sewage drain.

Install filtered water tap as shown.

Hole diameter: 30 mm

Make sure the individual parts are arranged cor-
rectly during installation.

Connect hose line to the filtered water outlet of the 
unit.

Connect hose line to the filtered water tap.

The system should be filled and rinsed out before dis-
pensing water for drinking.

WARNING

Health risk due to the contamination with germs.
Pay attention to hygiene and cleanliness when inserting 
and removing filter cartridges.
Do not touch the connections of the socket and filters.
Wear disposable gloves when inserting filters.
Do not damage the seals during installation and remov-
al.

The unit consists of four filters:

1

Multi-Protect-Filter

2

RO-Protect-Filter

3

RO-Protect-Filter

4

Post-Protect-Filter

Connect the unit to the water main.

Open stop-cock.

The system begins filling with water.

Rinse the system for at least fifteen minutes to re-
move air and any production residue from the fil-
ters.

Turn off filtered water tap.

The unit is now ready for use.

Turn on filtered water tap to dispense filtered water.

If the appliance will not be needed for more than 4 days:

Shut off water supply.

WARNING

Health risk due to increased micro-organism concentra-
tion in the water. 

Rinse the unit for at least 300 seconds.

WARNING

Health hazards on account of improperly repaired appli-
ance. The appliance may only be repaired by trained 
and skilled personnel.

Use only original parts of the manufacturer or part sug-
gested by him, such as

parts and wearing parts, 

accessories parts,

operating materials,

cleaning agents.

Before doing any work on the machine:

Shut off water supply.

Turn on the filtered water tap to depressurise the 
unit.

In order to ensure a reliable operation of the device, we 
recommend that you conclude a maintenance contract. 
Please contact your competent KÄRCHER service.

The filters installed in the unit must be replaced at reg-
ular intervals. This interval depends on use. An over-
view of the recommended filter replacement intervals 
can be found at the end of these instructions.

WARNING

Health risk due to the contamination with germs.
When replacing the filter cartridges, ensure hygiene and 
cleanliness.
Do not touch the connections of the socket and filters.
Wear disposable gloves when replacing a filter.

Do not damage the seals during installation and remov-
al.

ATTENTION

Risk of water damage. The filter chambers are full of 
water. Place a suitable container or dish underneath be-
fore removal.

Note

Used filters can be thrown away with household waste. 
Drain before disposing.

Prior to installing the filters, rotate the water inlets 
in direction of the black arrows, as far as they will 
go.

Unscrew filter (bayonet connection).

Replace the filter.

Remove the protective films.

Remove plugs at the connection.

Insert new filter.

Note

Filters must be installed in the same position and must 
not be interchanged! Observe the illustration.
If you're not sure how to replace the filters, please do 
not hesitate to contact your dealer or your KÄRCHER 
branch office.

The warranty terms published by the relevant sales 
company are applicable in each country. We will repair 
potential failures of your appliance within the warranty 
period free of charge, provided that such failure is 
caused by faulty material or defects in manufacturing. In 
the event of a warranty claim please contact your dealer 
or the nearest authorized Customer Service centre. 
Please submit the proof of purchase.

Only use accessories and spare parts which have 
been approved by the KÄRCHER. The exclusive 
use of original accessories and original spare parts 
ensures that the appliance can be operated safely 
and troublefree.

For additional information about spare parts, 
please go to the Service section at www.kaerch-
er.com. 

Connection to untreated water line

Installing the filtered water tap

Start up

Initial startup

Rinsing out the filter

Operation

Shutdown

Startup after shutdown

Care and maintenance

Maintenance instructions

Maintenance contract

Replacing filter inserts

Warranty

Spare parts

8

EN

Reviews: