Item # 60025
Mechanical Filter Box Kit
(Model # MF500P)
Questions, Problems, Missing Parts?
Before returning to your retailer, call our customer service department at
1-866-728-6187, 9 a.m. – 5 p.m. EST, Monday – Friday or e-mail us at [email protected]
Please have your model number available
Parts List
No Tools Required for Assembly
Part #
Description
Quantity
1
2
3
4
5
6
7
Filter Box-Bottom
Filter Box-Top
Filter Pad-Coarse
Filter Pad- Fine
Bio Media Balls
Pump – DD330
Fountain Head Kit*
1pc
1pc
1pc
1pc
12pc
1pc
1kit
*Fountain Head Kit includes;
(2) extension Tubes
(1) diverter valve
(1) 3 tier fountain head
(1) adapters for pump outlet
(1) connector for use of extension tubes
without diverter
Warnings
•
To reduce the risk of electrical shock, connect only to a properly grounded outlet.
•
Do not exceed the voltage shown on the pump.
•
Always disconnect pump from the power source before beginning any maintenance or work on the pump.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if damage is found.
•
Do not remove the grounding pin from the power cord plug.
Cautions
•
Use a proper power source as indicated on the pump label.
•
Keep the cord away from high temperatures or other heat sources.
•
Avoid using the pump when temperatures fall below 41° F.
•
Do not pump heated liquids.
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Operate in freshwater only. Avoid heavily chlorinated water.
•
Do not lift the pump by its power cord.
Operation Instructions
The MF500P is a general purpose, mechanical / biological filter system. It is designed to filter the water and promote healthy
bacteria that will provide a balanced environment in your pond. This filter is designed to work with a water pump that can circulate
a minimum of 200 gallons per hour. As a pre-filter, the MF500P reduces pond debris and particulate before they enter the pump
and other pond accessories. This pre-filterization reduces the clogging of your pump and accessories and minimizes the need for
cleaning.
1.
Remove the filter box from the packaging.
2. Place the pump inside the filter box as shown. The pump should be positioned so that the outlet will align with the holes in the
filter
