12
Operations
Technical Specifications
NOTE: Always use a pad, which has been designed for electric ultra high speed burnishing of at least 2000
rpm.
The sound pressure level at the operator’s ear was measured to be 62 dBA. This was a nearfield,
broad-band measurement taken in a typical industrial environment on a tile floor. This appliance
contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.
ITEM
DIMENSION/CAPACITY/MODEL
CONSTRUCTION
Heavy-duty die cast aluminum deck with
heavy-duty rubber bumper, tubular steel
adjustable handle with die cast
aluminum handle housing and belt
driven pad.
MOTOR
1.5 hp
PAD SPEED
1500 rpm
ELECTRICAL SYSTEM
115 volts, 60 Hz
LB1500, U1500, SPT1500
230 volts, 50 Hz
LB1500IE, LB1500IA
CABLE
75’ [22.9 m]
SWITCHES
Dual levers with safety lock
WHEELS
Four 5” (12.7 cm) dia., 1.25” (3 cm) wide,
non-marking tread
HANDLE
1.5” (4 cm) tubular steel, adjustable,
easy to use thumb activated safety lock
DIMENSIONS (L X W X H
)
31.5” (80 cm) X 21.5” (54 cm) X 43.5”
(111 cm)
86402430 Operator’s Manual - Floor Burnisher
