Kärcher Tornado BR 4735 ESC, Manual

Page: 10 / 18

English 11

Danger
Risk of injury and electrical shock! Always
lay the extension cable in such a way that it
does not get jammed or crushed and also
does not cause somebody to stumble over it.
Î Plug in the main plug.
Î Insert the end of the extension cable as
a loop in the strain relief clamp.
Î
Lock the rear wheels.
Î Place the machine on the platform in
such a way that the front wheels do not
touch the first step of the moving travel-
lator/ escalator.
Î Press pedal for lowering the brush head.
Brush head is lowered.
Î
Press the foot pedal with one foot and
while doing so move the machine a little
back and forth towards the side. The ma-
chine will position itself centrally in the
grooves of the steps; you will then hear a
rustling sound.

Danger
Risk of injury! Do not push the appliance
onto the escalator any further than the indi-
cations given below. Otherwise, the ma-
chine will get dragged off by the escalator.
In case of danger, immediately press the
emergency stop switch of the escalator.
The cleaning head must lie flat on the esca-
lator.
Î Set the appliance switch to regular or ba-
sic cleaning.
The machine is started.
Note
The machine switches off when the dirt wa-
ter reservoir is full. To restart the machine,
empty the dirt water reservoir and briefly set
the appliance switch to "0".
Î
Continue cleaning until the travellator/
escalator has completed 1 or 2 rounds.
Then move the machine towards the
side and start a new cleaning process.
Î Set the appliance switch to 'dry vacuum
cleaning' position. Dry vacuum cleaning
is activated.
Î Let the pump pressure fall to 0 bar.
Î Set the appliance switch to "0".
Î Release the foot pedal.
Cleaning operations
Moving the appliance to the side