Kärcher Tornado BR 4735 ESC, Manual

Page: 13 / 18

14 English
Î Remove the roller brushes (large) and in-
take brushes (small) and replace them
(pay attention to the hexagonal intake of
the brushes!).
Also check simultaneously the combs
and the guide rails and replace or clean
them as required.
Î Remove the combs and replace them.
To do this, slide the inlet combs on the
narrow rails and the outlet combs on the
wider rails.
Î Pull out all dirt particles from the suction
nozzles; do not push them in.
Î Loosen the fastening screws of the hold-
er for the guide rails.
Î Dismantle the guide rails.
Î Insert the guide rails in reverse se-
quence. Ensure that they sit properly.
Î Loosen the union joint. Remove nozzle,
washer and sieve.
Î Clean the nozzle or insert a new nozzle
in the union joint.
Î Insert washer and sieve and tighten the
union joint by hand.
Replacing the combs
Cleaning the suction nozzles
Replacing the guide rails
Check nozzles and filters for detergents