Kärcher SGV 6/5 Service Manual Download Page 55

Page: 55 / 73

English

5.906-590.0 Rev. 01 (05/17)

1 Electric connectors
2 Trigger lock
3 Microswitch
4 Intake



Separate the electric connectors.



Remove the trigger lock from the intake.



Replace microswitch.

NOTE

Mind the installation position.

1 Hand wheel
2 Casing
3 Electric connectors



Push the electrical socket plug connection as far as
possible into the casing.



Insert the handwheel.

NOTE

Mind the installation position.

1 Casing shell

2 Casing shell

Down



Place the upper casing part onto the lower casing part
and screw them together.

NOTE

Mind the installation position.
Lay lines free of kinks.
Do not crush the lines.

Service group does not contain any maintenance and in-
spection points.

The service group does not contain any error diagnosis.

The service group does not contain any peculiarities.

050 Maintenance and inspection

060 Error diagnosis

070 Peculiarities/ others

Summary of Contents for SGV 6/5










































































Search results

Summary of Contents for SGV 6/5

Reviews:

Related manuals for SGV 6/5

Brands by name

Popular brands

Kärcher SGV 6/5, Service Manual

Search results

Summary of Contents for SGV 6/5

Reviews:

Related manuals for SGV 6/5

Brands by name

Popular brands