English
5.906-590.0 Rev. 01 (05/17)
47
1 Drain screw
Place on a suitable work table.
Lay the appliance onto the push handle.
Loosen the drain screw.
Pierce the complete drilled hole by means of a suitable
tool and remove lime deposits.
1 Drain hose
Attach drain hose.
Set up the appliance.
Drain the remaining water from the steam boiler via the
drain hose.
1 Funnel
2 Fill hose
3 Probe inlet
4 Drain hose
Insert the fill hose into the probe inlet.
Take the drain hose to the top.
Fill descaler (RM 101, undiluted) into the steam boiler
via the funnel.
Do not fill the descaler into the steam boiler too fast.
몇
WARNING
The descaler can heavily foam upon filling it in and thus
cause damage.
The descaler must be filled in the steam boiler in 0.3 l
steps with approx. 2 minute breaks in between.
All together 2 litres of descaler must be filled into the
steam boiler so that the heating is completely coverd
with the descaler.
Allow the descaler to react for at least 30 minutes.
Descaling process
Descaling set
2.840-035.0
Lime-dissolving acid
RM 101
6.295-398.0
