background image

4

How To Use This Manual

This manual contains the following sections:

How to Use This Manual

Safety

Operations

Parts

The HOW TO USE THIS MANUAL section will tell 
you how to find important information for ordering 
correct repair parts.

Parts may be ordered from authorized dealers. When 
placing an order for parts, the machine model and 
machine serial number are important. Refer to the 
MACHINE DATA box which is filled out during the 
installation of your machine. The MACHINE DATA 
box is located on the inside of the front cover of this 
manual. 

The model and serial number of your machine is 
located inside of the backpack on the front case.

The SAFETY section contains important information 
regarding hazardous or unsafe practices of the 
machine. Levels of hazards are identified that could 
result in product damage, personal injury, or severe 
injury resulting in death.

The OPERATIONS section is to familiarize the 
operator with the operation and function of the 
machine.

The PARTS LIST section contains assembled parts 
illustrations and corresponding parts list. The parts 
lists include a number of columns of information:

REF – 

column refers to the reference number 

on the parts illustration.

PART NO.

 – column lists the part number for 

the part.

QTY

 – column lists the quantity of the part 

used in that area of the machine.

DESCRIPTION 

– column is a brief descrip-

tion of the part.

SERIAL NO. FROM

 – If this column has an 

(*) and a Reference number, see the SERIAL 
NUMBERS page in the back of your manual. 
If column has two asterisk (**), call manufac-
turer for serial number. The serial number 
indicates the first machine the part number is 
applicable to. The main illustration shows the 
most current design of the machine. When a 
boxed illustration is shown, it displays the 
older design.

NOTES 

– column for information not noted by 

the other columns.

NOTE: If a service or option kit is installed on your 
machine, be sure to keep the KIT INSTRUCTIONS 
which came with the kit. It contains replacement 
parts numbers needed for ordering future parts.

NOTE: The manual part number is located on the 
lower right corner of the front cover.

Model:

Date of Purchase:

Serial Number:

Dealer:

Address:

Phone Number:

Sales Representative:

8.638-519.0 - Operators Manual SG1 C BP

Summary of Contents for SG1 C BP






















Reviews: