8
Operations
Pre-Run Set Up
Unzip backpack.
If there is a used solution bottle in the machine,
remove the black cap from the bottle. Remove the
used bottle and discard.
Insert a fresh solution bottle into the solution bottle
bag Remove the cap from the solution bottle. Seal
the solution bottle with the black cap, inserting the
tube all the way to the bottom of the bottle.
Each solution bottle will last for approximately two
hours of use.
Screw the two gas cartridges onto the gas valve
manifold, ensuring that it is tightly connected. Place
the connected gas cartridges into the unit. Ensure
that the Main Gas hose is pushed down.
The two gas cartridges will last for approximately
eight hours of use.
Turn the two gas valves on by turning the knobs
counter clockwise.
Screw a new wire or nylon brush onto the end of the
nozzle of the lance.
8.638-519.0 - Operators Manual SG1 C BP
Summary of Contents for SG1 C BP
