– 6
Figure A1
The sensor surface must have contact
with the soil. For this purpose, the sen-
sor is inserted in the loose ground like a
plant and the soil is pressed around it.
Do not step or hammer on the sensor.
Figure A2
Implant the sensor directly in the irriga-
tion area and ensure that the sensor is
not located in a sink or elevation.
Figure 2, 4, B
Recommendation:
Replace the batter-
ies of the control unit and the sensor as
well as the sensor pad annually.
Completely drain all water from the irri-
gation device.
Remove the batteries from the sensor
and the control unit.
Store the irrigation device at a dry and
frost-proof location.
Subject to technical modifications!
Implanting the sensor
Care and maintenance
Maintenance
Storage
Technical specifications
Operating pressure
0,1 - 1,0 (1
- 10)
MPa
(bar)
Max. feed temperature 35
°C
Ambient temperature
+5 -> +60 °C
Frequency
868,1
MHz
Radio range (max.)
100
m
Battery type
9V (6LR61 /
Alkaline)
16
EN
