English
9.808-136.0 Rev. 00 (09/18)
36
1. If the user walks to fast during cleaning you can get
streaking or uneven cleaning.
6.5.11 Cleaning speed
6.5.12 Replacing a thermal relief valve
1. With a 1” open end wrench remove the thermal protector
for the inlet plumbing.
2.
Install new thermal relief valve. Make sure to
use the correct thread sealant.
6.5.13 Changing spray bar swivel
1.
Remove spray bar. See sec on 6.5.14.
2. Using a 6 mm hex wrench remove the swivel clamp bolts
(2).
3. Li? swivel and clamp off of surface clean deck.
4. Using a 6 mm hex wrench loosen the clamp bolt (5)
5. Install new swivel. Make sure to use the correct
thread sealant.
5
