Kärcher SC 4, Quick Reference

Page: 6 / 18

– 6
 Illustrations on Page 2
Illustration
 Fill the water reservoir up to the "MAX" marking.
Illustration
 Insert the steam plug into the appliance connector.
Illustration
 Plug in the mains plug.
 Turn on the appliance.
Illustration
 Indicator lamp "heating on" is blinking (green)
Once the indicator lamp (heater) lights up perma-
nently, the steam cleaner is ready to use.
Illustration
 Connect the accessories to the steam gun.
 Operate steam lever.
 Illustrations on fold-out page 3!
Illustration
 Insert steering roller and runningwheels and lock
them.
Illustration
 Open the cover of the appliance socket.
 Tightly insert the steam plug into the appliance con-
nector. The plug must click into place audibly.
To disconnect:
Press the cover of the appliance connector down
and disconnect the steam plug from the appliance
connector.
Illustration
Illustration
 Connect the required accessories (see Chapter
"How to use the accessories“) to the steam gun. In-
sert the open end of the accessory on the steam
gun and push onto the steam gun until the unlock-
ing button of the steam gun locks into place.
Illustration
 Use the extension tubes if necessary. To do so,
connect one or both extension tubes to the steam
gun. Insert the required accessories on the free
end of the extension tube.
 Move the selector switch for the steam volume
back (steam lever locked).
Illustration
 To detach the accessory parts, press the unlocking
button and pull the items apart.
The water reservoir may be refilled at any time.
ATTENTION
Do not use condensation water from the drier!
Do not fill with detergent or other additives (for example
fragrances)!
Do not use pure distilled water! Max. 50% distilled water
and 50% tap water.
Do not use collected rain water!
You can remove the water reservoir to fill it or you can
fill it directly on the appliance.
 Pour water from a container into the funnel inlet. Fill
up to the "MAX" marking.
 Pull the water reservoir straight up.
 Fill the water reservoir up to the "MAX" marking
while positioned vertically under the water tap.
 Insert the water reservoir and press downwards un-
til it arrests.
 Place the unit securely on a firm surface.
 Insert the mains plug into a socket.
 Press the ON switch to turn on the appliance.
 Wait until the indicator lamp (heater) lights up per-
manently.
The steam cleaner is ready to use.
B4 Selector switch for the steam volume (with child
protection)
B5 Steam hose
B6 Steam plug
C1 Detail nozzle
C2 Round brush Black
C3 Round brush Red
C4 Power nozzle
C5 Round brush Large
D1 Hand nozzle
D2 Terry cloth cover
D3 Microfibre cloth cover
E1 Extension tubes (two tubes)
E2 Unlocking button
F1 Floor nozzle
F2 Side-flaps
F3 Microfibre floor cloth
F4 Microfibre floor cloth 2 pieces
G1 Decalcifying sticks
H1 Steam pressure iron
H2 Indicator lamp - heater (ORANGE)
H3 Lower steam button
H4 Steam lock
H5 Upper steam button
H6 Temperature controller
H7 Steam plug
Quick Reference
Operation
Attaching the Accessories
Removing the Accessories
Filling the Water Reservoir
Directly on the appliance
Take off water reservoir
Turning on the Appliance
12 EN