Kärcher NT 48/1 TE, Original Instructions Manual

Page: 15 / 160

– 3
The vacuum cleaner is now ready. You can
now switch on the electrical power tool.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration
 Adjust the tool adapter to fit the connec-
tion of the electric power tool.
Illustration
 Remove the elbow from the suction
hose.
 Attach the tool adapter to the suction
hose.
Illustration
 Connect the tool adapter to the electric
power tool.
몇
CAUTION
Please observe the local provisions regard-
ing the wastewater treatment.
– The vacuum channel is equipped with a
float.
– When the dirt water reaches the highest
permissible level in the container, the
suction power is interrupted.
 Switch off the appliance at the main
switch.
Illustration
 Drain off dirty water through the drain-
age hose.
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
 Empty the dirt container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Illustration
 Store the suction pipes, the suction
hose and the mains cable as shown in
the illustration.
 Place the appliance in a dry room and
secure it from unauthorized use.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Illustration
 Transport the appliance as shown in the
illustration.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
몇
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Loosen the mounting nuts
 Remove the cartridge filter.
 Insert the new cartridge filter.
 Insert the fastening nut and tighten it.
 Insert and lock the suction head.

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable, mains plug and
socket of the appliance.
 Turn on the appliance.
Emptying the dirt container
Turn off the appliance
After each operation
Storing the Appliance
Transport
Storage
Care and maintenance
Change cartridge filter
Troubleshooting
Suction turbine does not run
15 EN