16
English
5.906-580.0 Rev. 00 (07/13)
Note
The container is engaged in the bumper (chassis). All
snap-in noses must be released for disassembly. In
the event that snap-in noses break off during disas-
sembly, the bumper must also be replaced.
Unhook the snap-in nose on the bumper.
Secure the snap-in nose against snapping back in
place by means of a wedge.
Remove container.
Release the snap-in noses at the suction air duct.
Remove the suction air guidance toward the front.
Install the suction air duct in the new container.
Snap the new container in place in the bumper.
6.9
Maintenance jobs on the container
6.9.1 Replacing the Me container
