![background image](http://html.mh-extra.com/html/karcher/mic-26c/mic-26c_original-operating-instructions_655747057.webp)
-
20
1 Holding pin
2 Safety pin
3 Folding plug
Same attachment as the roller caster, except that the
guide slots furthest from the vehicle are used.
Remove the protective caps from the hydraulic cou-
pling and connect the hydraulic hoses with the respec-
tive couplings.
Connect the protective caps to each other to protect
from contamination.
Connect the plug on the rear of the sweeper.
Secure the cable if necessary to prevent it from being
pulled in by moving parts.
Switch on the PTO to switch on the control
– Set the motor speed to "eco", the lower level of the
range.
1 Chassis mounted spreader
2 Work light
3 Retainer for support (4x)
Crank up the chassis mounted spreader with the sup-
ports to the required height until the rear retainer of the
carrier vehicle fits underneath.
Open the safety bolts at the chassis mounted spreader
prior to placing it on the vehicle, for this purpose, turn
the lever on the inside in a counter-clockwise direction
(left and right).
1 Safety pin
2 Lever
8.7.3
Attach the plate caster
8.7.4
Connecting the hydraulic lines
8.7.5
Connecting the tail lights
8.7.6
Operations
8.7.7
Prerequisites for operation
8.8
Chassis mounted spreader
8.8.1
Securing the chassis mounted spreader
57
EN
Summary of Contents for MIC 26C
Page 297: ......