24
Operations
Vacuum Operating Instructions
STEP 2:
To reclaim water, press the Vacuum Motor
switch located in the control cabinet to the "ON"
position. The vacuum system will draw water into the
40 gallon holding tank and will automatically stop when
the tank is full.
STEP 3:
Located in the vacuum tank is the large debris
sock filter. To clean the sock filter turn off vacuum motor
and then remove the vacuum hose and the two rubber
clamps located on the top of vacuum inlet. Grasp the
two handles and lift the lid vertically until the sock filter
clears the opening. Remove the filter and dispose of
the contents per local regulations. Replace and secure
the bag filter, lid and vacuum hose.
Landa ECOS 7000 Operator’s Manual 9.801-316.0 - E
ma
ste
r
GE
NE
RA
TO
R
E
n
vi
ro
n
m
en
tal
ly
Cle
an
Op
e
ra
ting
Sy
ste
m
Vacuum
Head
Standing
Water
1-1/2" Hose
Barb
STEP 1:
Keep the working area free of rubbish. Attach the vacuum hose to the 1-1/2" hose barb located in the rear
of the trailer. Attach the vacuum head to the other end of the vacuum hose. Locate the vacuum head at the lowest
area of standing water. If washing, set up a damming or a containment system. Start engine as outlined in
"Pressure Washing Instructions".
VACUUM
RECLAIM
BURNER
PUMP
ON
OF
F
POWER
HO
SenDEC
TA
CH
/HOU
R
1/10
DO N
OT
ON
THIS
Sock
Filter
Lid
Rubber
Clamps