Operating Instructions
KM 85/50 W B Comfort / KM 85/50 W B Classic
English
20
Risk of overturning on too
high gradients!
Danger!
The machine could topple over
when driving and turning on slopes.
KM 85/50 W B Comfort
—
Drive only on slopes up to 18 %
in the travelling direction
—
Drive only on slopes up to 18 %
transverse to the travelling
direction.
KM 85/50 W B Classic
—
Drive only on slopes up to 2 % in
the travelling direction
—
Drive only on slopes up to 2 %
transverse to the travelling
direction.
For our environment
Caution, danger to the
environment from engine
or hydraulic oil!
Take spent oil after an oil change
to an oil collecting point or a
waste disposal company.
Intended use
—
This sweeper is predominantly
intended for sweeping outside
surfaces.
—
Ít complies with the "L"
application category for non-
health hazardous dusts.
—
It is not intended for use on
public traffic routes
Suitable surfacings:
—
Asphalt
—
Paving stones
—
Screed
—
Concrete
Function description -
sweeping machine
The KM 85/50 W B works according
to the throw-over principle.
—
The side brush (3) cleans corners
and edges of the sweeping
surface and transports the dirt in
the path of the main brush.
—
The rotating main brush (4)
transports the dirt directly into the
debris container (5).
—
The dust swirled up in the
container is separated by way of
the dust filter (1) and the filtered,
clean air removed by the suction
turbine (2).
Machine components
1. Push handle
2. Lever for coarse-dirt flap
3. Unit cover
4. Swivel caster with parking brake
5. Side brush
6. Debris container with transport
rollers
7. Filter shaker for the dust filter
8. Push handle lock (Applies only to
KM 85/50 W B Comfort)
1. Starter rope
2. Raising/lowering main brush
(Applies only to
KM 85/50 W B Comfort)
3. Operating hour counter (Applies
only to KM 85/50 W B Comfort)
4. Raise / lower side brushes
5. Multifunctional lever
Multifunctional lever
1. Setting "CHOKE" starting aid
2. "HARE" setting – operating speed
3. "0" setting – engine OFF
Before first operating
Unloading instructions
—
The machine was secured on a
pallet with stretch belts or ropes
for safe transport. Proceed as
follows when unloading:
Cut the plastic packing tape and
remove the film
Knock away the blocks securing
the wheels and lift off the
machine from the pallet
Warning!
Do not use a fork lifter for unloading;
the machine can be damaged by it.
Tests
Check the engine oil level
See maintenance tasks chapter for
description
Check that the spark plug
connector is tightend securely
See maintenance tasks chapter for
description
