Operating instructions
KM 100/100 R B / KM 100/100 R LPG
English
29
Installing/replacing the gas
cylinder – applies only to
KM 100/100 R LPG
Warning!
Only type-approved replacement
cylinders with a capacity of 11 kg
are to be used.
Danger!
—
Comply with safety requirement
guidelines for LPG-powered
motor vehicles!
—
Icing and foamed yellow deposits
at the gas cylinder are an
indication of leakages.
—
Replacing the cylinder is
permitted only by trained
personnel.
—
It is forbidden to replace power
gas cylinders in garages or in
underground rooms.
—
Do not smoke or use a naked
flame when replacing cylinders.
—
When replacing the cylinder
firmly close the LPG cylinder’s
shut-off valve and immediately
place the protecting cap on the
empty cylinder.
!
Position the gas cylinder so that
the screwed connection of the
shut-off valve points vertically
upwards
!
Close cliplock
!
Attach fuse split-pin
!
Remove the protecting cap (1)
from the gas cylinder’s
connection valve
!
Screw on gas hose with the
union nut (2) (spanner opening
30 mm)
Danger!
Danger of accidents by projecting
gas hose
!
Fasten the gas hose as shown in
the above figure.
A gas hose projecting from the side
can become entangled with
projecting objects during driving
Note:
Connection has a left-hand thread!
Warning!
Do not open the gas shut-off
valve (3) until just before starting the
unit (see chapter on starting the
machine).
Start machine
Note:
The machine is equipped with a
seat contact switch. The machine is
switched off as the driver leaves the
seat and the parking brake
automatically actuated.
Applies only to KM 100/100 R B
!
Open unit cover, engage stay bar
Applies only to KM 100/100 R B
Open the fuel tap
!
Push lever in "ON" direction
!
Close unit cover
!
Sit on the driver seat
!
Do NOT actuate the drive pedal!
Applies only to
KM 100/100 R LPG
Open gas feed
!
Open gas shut-off valve (3)
—
Turning counterclockwise -
OPEN
!
Sit on the driver seat
!
Do NOT actuate the drive pedal!
!
Main brush switch in its upper
position
