background image

16 

English

!

Pull on the lever of the trigger gun; the de-
vice will switch on.

Note:

 Release the lever of the trigger gun; the 

device will switch off again. High pressure re-
mains in the system.

Low-pressure flat jet
for low-pressure cleaning or for opera-

tion with detergents

High-pressure flat jet

for large areas of dirt

Please use exclusively KÄRCHER detergents 
and care products to carry out the respective 
cleaning task, as these were specifically de-
velopped for your appliance. The use of other 
detergents and care products may lead to 
premature wear and can invalidate your war-
ranty claims. Please obtain information at 
your local dealer or request information direct-
ly from KÄRCHER.
Illustration 

!

Pull detergent suction hose as far as is re-
quired out of the housing.

!

Suspend end of detergent suction hose in 
a container filled with detergent.

Illustration 

!

Set 2-part nozzle to low-pressure flat jet.

Note:

 This will mix the detergent with the 

water stream.

!

Spray the detergent sparingly on the dry 
surface and allow it to react, but not to dry.

!

Spray off loosened dirt with the high-pres-
sure jet.

!

Release the lever on the trigger gun.

!

Lock the lever on the trigger gun.

!

During longer breaks (more than 5 min-
utes), also turn the appliance off using the 
"0/OFF" switch.

!

Insert the trigger gun in its holder.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there is 

no pressure in the system.
After cleaning procedures during hot water 
operation, run the appliance with cold water 
for another to cool off the boiler system or the 
hot high pressure hose

!

After working with detergent, suspend de-
tergent suction hose in a container filled 
with clear water, switch the appliance on 
for around 1 minute once the spray lance 
has been removed and rinse until water 
runs clear.

!

Release the lever on the trigger gun.

!

Turn off the appliance "0/OFF".

!

Turn off tap.

!

Detach the appliance from the water sup-
ply.

!

Press the lever on the trigger gun to re-
lease any remaining pressure in the sys-
tem.

!

Lock the lever on the trigger gun.

!

Pull out the mains plug.

!

Insert the trigger gun in its holder.

!

Stow away the mains cable, the high-
pressure hose and accessory at the appli-
ance.

m

Danger

Turn off the appliance and remove the mains 
plug prior to any care and maintenance work.

The appliance is maintenance-free.

Prior to longer periods of storage, e.g. in the 
winter:

!

Completely drain all water from the appli-
ance: Switch the appliance on with de-
tached high-pressure hose and detached 
water supply (max. 1 minute) and wait, 
until no more water exits at the high-pres-
sure connection. Turn off the appliance.

!

Do not store the appliance at tempera-
tures below 6°C while it is filled with sum-
mer Diesel. Risk of flocking of diesel 
components. Use winter diesel in low tem-
peratures.

Spray lance with 2-way nozzle

Working with detergent

Recommended cleaning method

Interrupting operation

Finish operation

Maintenance and care

Maintenance

Storage

Summary of Contents for K 855 HS











Reviews: