Kärcher K 7 Full Control, Manual

Page: 175 / 262

– 3
The T-Racer can be parked on level surfaces in the
parking position during breaks.
 Illustration
Remove the high-pressure gun from the extension
tubes.
Push the extension tubes to the front.
You can use the extension pipes with any other Kärcher
accessory.
Use a moist cloth and clean the appliance after use.
Store the appliance in a frost free area.
The device can be suspended into the KÄRCHER or-
ganiser for storage.
Pressure washer does not build up pressure or is
pulsating.
 Dismantle the high-pressure nozzles, check the
high-pressure nozzles for damage, rinse the T-
Racer with clean water then reinstall the high-pres-
sure nozzles.
You need to use the matching high pressure noz-
zles to ensure that your high pressure cleaner
works properly.
 Select and install the high-pressure nozzles in ac-
cordance with the pressure washer used.
Parking position
Tip
Care
Troubleshooting
9 EN