Kärcher K 7 Full Control, Manual

Page: 173 / 262

– 1
Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.
The T-Racer can be used with all Kärcher Home & Gar-
den pressure washers of the categories K2 to K7.
For units constructed in 1991 and earlier you need an
additional adapter (order no.: 2.642-893.0).
The T-Racer is ideally suited for the cleaning of floor
and wall surfaces made of different materials, such as
wood, plastic, concrete, tiles, and natural stone, as well
as for cleaning Japanese gardens and pebbled surfac-
es. Use the T-Racer exclusively in your private house-
hold.

DANGER
Do not reach under the edge of the T-Racer
during operation!
HARD
For sturdy surfaces (e.g. tiles, concrete,
stone).
SOFT
For sensitive surfaces (e.g. wood).
The packaging material can be recycled. Please
do not place the packaging into the ordinary re-
fuse for disposal, but arrange for the proper re-
cycling.
Old appliances contain valuable materials that
can be recycled. Please arrange for the proper
recycling of old appliances. Please dispose your
old appliances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the ingredients
at:
www.kaercher.com/REACH
The warranty terms published by the relevant sales
company are applicable in each country. We will repair
potential failures of your appliance within the warranty
period free of charge, provided that such failure is
caused by faulty material or defects in manufacturing. In
the event of a warranty claim please contact your dealer
or the nearest authorized Customer Service centre.
Please submit the proof of purchase.
Use only original KÄRCHER spare parts. You will find a
list of spare parts at the end of these operating instruc-
tions.

Please observe the safety in-
structions of your high-pres-
sure cleaner.
 Only trigger the high-pres-
sure jet at the high-pressure
gun if the T-Racer is located
on the surface to be cleaned.
 There must be no persons in
the immediate vicinity of the
cleaning head.

Beware of the recoil! Make
sure that you have a firm foot-
ing and hold the high-pres-
sure gun with the extension
tube or handle firmly.
 Upon completion of the
cleaning operation, switch off
the high-pressure cleaner.
When working on the T-Rac-
er, disconnect it from the
high-pressure gun as well.
 Maximum water temperature
60°C (please observe the in-
structions for your high-pres-
sure cleaner).
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
 Illustration
1 Casing
2 Handle
3 Twist grip Power (for adjustment of the cleaning
pressure)
4 Foot pedal for edge cleaning
5 Foot pedal for surface cleaning
6 Bayonet connection with union nut
7 Extension tubes (two tubes)
8 Rotor arm
9 Green high-pressure nozzle
10 Yellow high pressure nozzles (2 pieces)
11 Grey high-pressure nozzles (2 pieces)
12 Safety clip
13 Protective grid
General information
Proper use
Symbols
Environmental protection
Warranty
Spare parts
Safety instructions
Description of the Appliance
7 EN