10
English
몇
Danger
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make sure
that you have a firm footing and are also hold-
ing the trigger gun and spray lance firmly.
Caution
Prior to cleaning, make sure that the high
pressure is placed safely on level ground.
Wear protective goggles and protective cloth-
ing during the cleaning process.
Unlock the lever on the trigger gun.
Pull on the lever of the trigger gun; the de-
vice will switch on.
Note:
Release the lever of the trigger gun; the
device will switch off again. High pressure re-
mains in the system.
Carrying out the most common cleaning
tasks. The work pressure can be stagelessly
regulated between "Min" and "Max".
Release the lever on the trigger gun.
Turn the spray lance to the desired posi-
tion.
Note
: Suitable for working with detergent; for
this, turn the spray lance to the "Mix" position.
For particularly dirty items or areas.
–
Not suitable for use with detergents.
Suitable for use with detergents.
Caution
Car tyres, paint or sensitive surfaces such as
wood should not be cleaned with the dirt blast-
er, as there is a risk of damage.
Please use exclusively KÄRCHER detergents
and care products to carry out the respective
cleaning task, as these were specifically de-
veloped for your appliance. The use of other
detergents and care products may lead to
premature wear and can invalidate your war-
ranty claims. Please obtain information at
your local dealer or request information direct-
ly from KÄRCHER.
Notes regarding the detergent
: The most
commonly used KÄRCHER detergents can
be purchased ready to use in their Plug 'n'
Clean detergent bottles with locking lids. This
will make the pesky refilling and filling proc-
esses redundant.
Illustration
Remove the lid from the Plug 'n' Clean de-
tergent bottle and press the detergent bot-
tle into the detergent connection with the
opening facing down.
Illustration
Adjust the suction volume of the detergent
solution by means of the dosage regulator
for detergents.
Use spray lance with pressure regulation
(Vario Power).
Turn the spray lance to "Mix" position.
Note:
This will mix the detergent with the
water stream.
Note
: If required, the washing brushes can be
used to work with detergent.
Spray the detergent sparingly on the dry
surface and allow it to react, but not to dry.
Spray off loosened dirt with the high-pres-
sure jet.
Release the lever on the trigger gun.
Lock the lever on the trigger gun.
During longer breaks (more than 5 min-
utes), also turn the appliance off using the
"0/OFF" switch.
Insert the trigger gun in its holder.
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there is
no pressure in the system.
Remove the Plug 'n' Clean detergent bot-
tle from the intake and close it with the lid.
To store, place into the intake rotated by
180°.
Release the lever on the trigger gun.
Turn off the appliance "0/OFF".
Turn off tap.
High pressure operation
Spray lance with pressure regulation
Spray lance with Dirtblaster
Washing brush
Working with detergent
Recommended cleaning method
Interrupting operation
Finish operation
