background image

14 

English

Î

Release the lever on the trigger gun.

Î

Lock the lever on the trigger gun.

Î

During longer breaks (more than 5 min-

utes), also turn the appliance off using 

the "0/OFF" switch.

Î

Insert the trigger gun in its holder.

Caution

Only separate the high-pressure hose from 
the trigger gun or the appliance while there 
is no pressure in the system.

Î

After working with detergent, suspend 

detergent suction hose in a container 

filled with clear water, switch the appli-

ance on for around 1 minute once the 

spray lance has been removed and 

rinse until water runs clear.

Î

Release the lever on the trigger gun.

Î

Turn off the appliance "0/OFF".

Î

Turn off tap.

Î

Detach the appliance from the water 

supply.

Î

Press the lever on the trigger gun to re-

lease any remaining pressure in the 

system.

Î

Lock the lever on the trigger gun.

Î

Pull out the mains plug.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
during transport (see Specifications).

Î

Lift appliance by the carrying handle 

and carry it.

Î

Secure the appliance against shifting 

and tipping over.

Caution

In order to prevent accidents or injuries, 
keep in mind the weight of the appliance 
when selecting a storage location for it (see 
Specifications).

Prior to extended storage periods, as dur-

ing the winter, also observe the instructions 

in the Care section.

Î

Park the machine on an even surface.

Î

Insert the trigger gun in its holder.

Î

Stow away the mains cable, the high-

pressure hose and accessory at the ap-

pliance.

Caution

Protect the appliance and its accessories 
against frost.

The appliance and its accessories can get 

destroyed through frost if there are any wa-

ter residues in them. To avoid damage to 

them:

Î

Completely drain all water from the ap-

pliance: Switch the appliance on with 

detached high-pressure hose and de-

tached water supply (max. 1 minute) 

and wait, until no more water exits at the 

high-pressure connection. Turn off the 

appliance.

Î

Store the appliance and the entire ac-

cessories in a frost-safe room.

Danger

Turn off the appliance and remove the 
mains plug prior to any care and mainte-
nance work.

Prior to longer periods of storage, e.g. in 

the winter:

Î

Remove filter from suction hose for de-

tergent and clean under running water.

Interrupting operation

Finish operation

Transport

When transporting by hand

When transporting in vehicles

Storage

Storing the Appliance

Frost protection

Maintenance and care

Care

Summary of Contents for K 2.150

























Reviews: