10
English
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Relevant EU Directives
98/37/EC
2006/95/EC
89/336/EEC (+91/263/EEC, 92/31/EEC,
93/68/EEC)
Applied harmonized standards
EN 55014–1: 2000 + A1: 2001 + A2: 2002
EN 55014–2: 1997 + A1: 2001
EN 60204–1
EN 61000–3–2: 2000 + A2: 2005
EN 61000–3–3: 1995 + A1: 2001
5.957-453
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
In the event of a warranty claim please con-
tact your dealer or the nearest authorized
Customer Service centre. Please submit
the appliance, including all accessories,
and the proof of purchase.
Troubleshooting
Fault
Possible cause
Remedy
of whom
Motor does not turn.
There is no voltage at the motor.
Check fuse and cables.
Electricians
Thermal protection switch in the
coil has triggered.
Fix cause for overload.
Electricians
Error current protective switch
was triggered.
Remove cause and reset error current protec-
tive switch.
Electricians
Motor does not turn, clean-
ing head does not turn
Drive parts in support pipe bro-
ken.
Check parts and replace defective parts.
Customer Service
Cleaning head only turns
around one axle or abrupt-
ly
Cleaning head touches container
wall.
Change position of cleaning head and make
sure it can run smoothly.
Operator
Excessive tooth play in the bevel
wheels.
Adjust and replace worn parts.
Customer Service
Destroyed gears on bevel wheels. Replace bevel wheels.
Customer Service
Uneven cleaning jet
Spray nozzles clogged.
Clean spray nozzles.
Operator
Spray nozzles damaged.
Replace spray nozzles.
Operator
Spray volume too low.
Leak on the cleaning head or its
supply line.
Check pump, check pressure lines/hoses.
Operator
Filter in the supply line plugged.
Clean filter.
Operator
Significant quantities of
cleaning liquid are leaking
from the drainage borings
of the support pipe.
Slide ring gaskets in the support
pipe are worn.
Check parts and replace defective parts.
Customer Service
Significant pressure loss,
but no cleaning liquid
leaks at the drainage bor-
ings
Slide ring gaskets in the cleaning
head are worn.
Check parts and replace defective parts.
Operator
Accessories
Description
Order No.
Hole cone
4.132-002
Locking screw (for 1 noz-
zle operation)
5.411-061
Double handle
2.863-036
CE declaration
Product:
Internal cleaner
Type:
HKF 50 M
Warranty
Summary of Contents for HKF 50 M
Page 2: ...2...
Page 49: ...49 30 K rcher Kaercher 1 2 3 4 A B 5 901 068...
Page 57: ...cc 57 1 K rcher K rcher 1 2 3 4 A B...
Page 93: ...93 K rcher Karcher 1 2 3 4 A B 5 901 068...
