![background image](http://html1.mh-extra.com/html/karcher/hkf-50-e/hkf-50-e_original-instructions-manual_654996018.webp)
-
8
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2016/01/01
5.957-453
5.957-454
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Troubleshooting
Fault
Possible cause
Remedy
of whom
Motor does not turn.
There is no voltage at the motor.
Check fuse and cables.
Electricians
Thermal protection switch in the coil
has triggered.
Fix cause for overload.
Electricians
Error current protective switch was
triggered.
Remove cause and reset error current protective
switch.
Electricians
No compressed air present or pres-
sure too low.
Check compressed air supply.
Operator
Compressed air supply line kinked. Check compressed air hoses.
Operator
Motor does not turn, clean-
ing head does not turn
Mechanical defect on:
– Coupling parts
– Drive shaft
– Gears
Check parts and replace defective parts.
Customer Service
Cleaning head turns too
abruptly
Cleaning head touches container
wall.
Change position of cleaning head and make sure
it can run smoothly.
Operator
Worn drive discs cause increased
bevel play.
Replace drive discs.
Customer Service
Destroyed gears on bevel wheels. Replace bevel wheels.
Customer Service
Uneven cleaning jet
Spray nozzles clogged.
Clean spray nozzles.
Operator
Spray nozzles damaged.
Replace spray nozzles.
Operator
Accessories
Description
Order No.
Maintenance unit for com-
pressed air (only for com-
pressed air drive)
6.610-020
Hole cone in PE design
5.132-016
Locking screw (for 1 nozzle
operation)
5.411-061
Compressed air filter with
automatic condensate drain
(only for compressed air
drive)
6.414-154
Compressed air hose (sold
by the meter)
6.388-192
Exhaust air silencer with oil
separator
on request
EU Declaration of Conformity
CEO
Head of Approbation
HKF 50 E
Product:
Internal cleaner
Type:
HKF 50 E
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/30/EU
Applied harmonized standards
EN 55014–1: 2006+A1: 2009+A2: 2011
EN 55014–2: 2015
EN 60204–1
EN 61000–3–2: 2014
EN 61000–3–3: 2013
HKF 50 P
Product:
Internal cleaner
Type:
HKF 50 P
Relevant EU Directives
2006/42/EC (+2009/127/EC)
2014/34/EU
Applied harmonized standards
EN ISO 12100
EN 1127-1: 2011
EN 13463-1: 2009
EN 13463-5: 2011
Applied national standards
-
ID no. of notified body
0123
TÜV SÜD
Ridlerstr. 65
80339 München
Test report no.
Ex5 0307 10088 097
Marking
II 1/2 G c T4 X +2 °C < Ta < +40 °C
II 1/3 D c T 120 °C X +2 °C < Ta <
+40 °C
Warranty
18
EN
Summary of Contents for HKF 50 E
