English
HDS 796 CW
9
Clean strainer in low water
protection
–
Unfasten union nut and detach
hose
–
Take out strainer
If necessary, screw in bolt M8
approx. 5mm to pull out strainer.
–
Clean strainer in water
–
Slide in strainer
–
Mount hose
–
Tighten union nut
Clean filter at cleaning-agent
suction hose
–
Pull out cleaning-agent suction
hose
–
Clean filter in water and re-insert
Change oil
–
Provide a collecting container for
approx. 1 litres of oil
–
Place drainage spout in position
–
Loosen starting screw
KÄRCHER tip
*
Cut open RM 110 bottle and use
as drainage spout
–
Drain off oil via drainage spout into
collector
*
Dispose of used oil in appropriate
manner or hand in at a collection
point.
–
Tighten drain plug again
–
Slowly fill with oil as far as MAX
mark
Air bubbles must be able to escape.
Refer to technical data for oil grade
and quantity to be used.