Kärcher HDS 5/11 U, Original Instructions Manual

Page: 10 / 13

– 7
Note: Observe handling instructions of the
anti-freeze agent manufacturer.
 Fill commercial grade anti-freeze into
the water connection.

Switch on appliance (without heater) till
the appliance has been completely
rinsed.
A certain corrosion protection is achieved
with this as well.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.

Danger
Risk of injury! Risk of tipping with high in-
clines, if the inclination is too large to the
side and with unstable surfaces.
–
The appliance should only be used on
gradients of max. 2%.
–
Only use the machine on sound surfac-
es.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 Lay the appliance on its rear prior to
transporting it and drain the residual
water.
 Pull the device behind you at the carry-
ing handle for transporting it over longer
distances
 To carry, hold the appliance by the han-
dles and the pushing handle.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Set the appliance switch to "0/OFF“.
 Shut off water supply.
 Turn on pump shortly (appr. 5 seconds)
with device switch.
 Set the appliance switch to "0/OFF“.
 Activate hand spray gun until device is
pressure less.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Lock the trigger gun.
 Allow device to cool down.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
 Clean filter in the water connection.
 Clean filter at the detergent suck hose.
Note: It is not necessary to perform an oil
change on the high-pressure pump.
 Remove the filter.

Clean filter in water and reinstall.
 Clean filter in water and reinstall.
Flush device with anti-freeze agent
Storage
Transport
Maintenance and care
Safety inspection/ maintenance
contract
Maintenance intervals
Weekly
Monthly
Maintenance Works
Clean filter in the water connection.
Clean filter at the detergent suck hose
23 EN