background image

– 4

Warning

Observe regulations of water supplier. 
According to the applicable regula-
tions, the appliance must never be 
used on the drinking water supply 
without a system separator. Use a 
suitable system separator manufactured by 
KÄRCHER; or, as an alternative, a system 
separator as per EN 12729 Type BA. Water 
flowing through a system separator is con-
sidered non-drinkable. 

Caution

Always connect the system separator to 
the water supply, never directly to the appli-
ance!

For connection values refer to technical 
specifications

Attach supply hose (minimum length 
7.5 m, minimum diameter 1/2“) to the 
water supply set by means of a hose 
clamp.

Connect the supply hose to the water 
connection point of the machine and at 
the water supply point (for e.g. a tap). 

Note:

 The supply hose and the hose clamp 

are not included in the scope of delivery.

Connect suction hose (minimum diame-
ter 1/2“) with filter (accessory) to the 
water connection point.

Max. suck height: 0.5 m

Danger

Never suck in water from a drinking water 
container. Never suck in liquids which con-
tain solvents like lacquer thinner, petrol, oil 
or unfiltered water. The sealings within the 
device are not solvent resistant. The spray 
mist of solvents is highly inflammable, ex-
plosive and poisonous.

For connection values, see technical 
data and type plate.

The electrical connections must be 
done by an electrician according to IEC 
60364-1. 

Set the appliance switch to "0/OFF“.

Plug in the main plug.

Danger

Danger of injury by electric shock.

Unsuitable extension cables can be 
hazardous. Only use extension cables 
outdoors which have been approved for 
this purpose and labelled with a suffi-
cient cable cross section:

Always unwind extension lines com-
pletely.

The plug and coupling of the extension 
cable used must be watertight.

Caution

The highest allowed net impedance at the 
electrical connection point (refer to techni-
cal data) is not to be exceeded. In case of 
confusion regarding the power impedance 
present on your connection, please contact 
your utilities provider.

Danger

Risk of explosion!
Do not spray flammable liquids.

Caution

Never operate device with empty fuel 
tank The fuel pump will otherwise be 
destroyed. This also applies to cold wa-
ter operation.

Risk of damage! Never operate the ap-
pliance without a filter in the water con-
nection.

Risk of damage! Do not place any ob-
jects (hose,etc.) on or over the chim-
ney.

Device with hose drum:
Always unwind high pressure hose 
completely

Water connection

Suck in water from vessel

Power connection

Operation

20

EN

Summary of Contents for HDS 5/11 U














Reviews: